 |
| HIGHWIRE Quad with four Power over Ethernet OUT ports
|
HIGHWIRE Quad 4-port with 4 x PoE OUT - This model integrates HIGHWIRE with a four-port 100BaseT network switch, including Power over Ethernet (PoE) for powering four PoE Class 2 (6.5W) IP cameras via the CAT5 network cable. HIGHWIRE Quad itself is powered by a 12V or 24V supply near the camera end, and supports all four IP cameras connections on one legacy coaxial video cable, communicating with a standard single-port HIGHWIRE at the control room end. HIGHWIRE Quad can even support 4 x mega-pixel IP cameras on one coax. Wall-mountable, robust, compact and extremely cost-effective.
Highwire Quad has an available budget of 30 Watts, which it can allocate to POE devices according to their Power Class.
Note: PoE out capability is limited to 2 ports when using Class0 devices. Add the new OUTCLASS PoE Adaptors in this case (not included). |
MSRP Price: $475.00
|
| Enter Quantity: |
|
| HIGHWIRE turns any existing analogue video cable (co-ax) into a high-speed Ethernet connection.Thus the original investment in the cable installation can be retained, even though IP cameras are installed. With HIGHWIRE, Ethernet connections can be up to 350m apart (or longer with RG11 cable) which overcomes a severe limitation (100m) with standard CAT5 cable. HIGHWIRE is not a video codec or any kind of video capture device – it is simply a signal conversion unit for ANY type of network device (IP camera, network switch, DVR / NVR, PC etc.) Main features: • 4-port PoE HIGHWIRE (4 x 6.5W Class 2 outputs) • 12-24V DC or 24-32V AC power accepted • Supports 4 x mega-pixel or standard IP cameras over single coaxial cable • Simple installation, no configuration required • Combines HIGHWIRE and four-port network switch • Wall mountable, compact and robust design |
|
10"X8"X3" |
| Warranty Information:
|
|
|
| |
|
|
|
