 |
| Altai A2 WIFI Access Point/Bridge
|
A2 WIFI Access Point/Bridge
2.4 GHz broadcast & 5 GHz backhaul. Includes built-in 5GHz antenna, PoE Adapter with cable, mounting kit and 2 external 2.4Ghz antenna ports. The 2.4Ghz external antennas are not included (sold separately)
The Altai A2 WiFi Access Point is designed to be used in Altai A8 WiFi cellular systems to increase system capacity, extend coverage and fill-in low signal areas that are blocked by terrain or buildings.
The A2 can also be used as a standalone access point for campus area coverage (smaller systems), where the A8 WiFi Cellular Base Station is not required
Operating as an Access point, the Altai A2 will need two 2.4GHz Omni antennas. As a point to point bridge operating at 5.8 GHz, the Omni antennas are not needed. |
MSRP Price: $940.00
|
| Enter Quantity: |
|
The A2 employs the cellular concept of expanding system capacity by dividing the coverage area of an A8 WiFi Cellular Base Station. It enables network operators to take advantage of the cost savings provided by the A8 WiFi Cellular Base Station's 300-500% greater coverage area when initially installing a WiFi system.
As system capacity needs to increase, the A2 can be used to expand system capacity over 300%. The A2 can be installed exactly where the capacity requirement is the greatest.
The A2 has both a high capacity 2.4 GHz broadcast radio and a 5 GHz backhaul radio not only to expand in-system capacity but also to extend the range of a WiFi system. The 5 GHz backhaul of A2 can be connected directly to an A8 or an Altai A0 Bridge radio to create a high capacity WiFi system.
The A2 can also be used as a standalone Access Point for smaller system. It can be a cost effective alternative for smaller coverage areas where the coverage of an A8 WiFi is not required.
A2 is combined with the A8 WiFi Cellular Base Station and the A0 WiFi Bridge, it can be used to create the most cost-effective high capacity WiFi system possible. |
|
|
| Warranty Information:
|
|
|
| |
|
|
|
