IP Paging

Add-on equipment including Paging, Door openers, and standalone conference server.

CyberData VoIP Loudspeaker Amplifier PoE V2

The new CyberData V2 SIP-enabled VoIP Loudspeaker Amplifier provides an easy method for implementing an IP- based overhead paging system for both new and legacy installations.
With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line-out connector for connection to an external amplifier.
The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Loudspeaker Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.

CyberData 3-port Ethernet Switch

The Cyberdata 3-Port Ethernet Switch enables users of a PC to split a single Ethernet port into two Ethernet ports, eliminating the need for additional cable runs. The power for the switch is provided by a USB connection on the host PC. No external power supply is required. The three ports auto-negotiate and work in full 10/100 duplex modes.

CyberData PoE Power Injector

The Power Injector eliminates the need for a PoE enabled hub. In a typical installation, the Power Injector is connected between a non-PoE hub and a CyberData paging device, providing inline power capability to an Ethernet Cat 5 cable.

The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. POE 802.3af (Power-over-Ethernet) and a wireless option are available.

Paging horns sold separately.

CyberData Ceiling Mount Bracket

The Ceiling Mount Bracket allows the Cyberdata VoIP Ceiling Speaker to be mounted into 24-inch wide ceiling tiles.

CyberData VoIP Indoor Intercom - Signal White

The CyberData SiP-enabled VoIP Indoor Intercom is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) door entry device that easily connects into existing local area networks (LANs) with a single cable connection. The intercom is compatible with most SIP-based IP PBX servers that comply with the SIP RFC.

CyberData VoIP Intercom

The CyberData SIP-enabled VoIP Intercom is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) door entry device that easily connects into existing local area networks (LANs) with a single cable connection. The intercom is compatible with most SIP-based IP PBX servers that comply with the SIP RFC. Its tamper-proof design allows the unit to be mounted securely and safely.

CyberData VoIP Loudspeaker Amplifier AC

VoIP Loudspeaker Amplifier, AC powered

The CyberData SIP-enabled VoIP Loudspeaker Amplifier provides an easy method for implementing an IP-based overhead paging system. The Amplifier is designed for noisy environments such as warehouses and shop floors. It comes with a moisture-proof NEMA enclosure.

The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. POE 802.3af (Power-over-Ethernet) and a wireless option are available.

Paging horns sold separately.

CyberData VoIP Paging Gateway

The CyberData SIP-enabled Paging Gateway allows the use of legacy analog zone paging amplifiers when converting to a VOIP system. The Gateway is compatible with most SIP-based IP/PBX servers that comply with the SIP RFC 3261. The Gateway is powered via PoE 802.3af - no external power supply is needed.

CyberData VoIP Loudspeaker Amplifier Singlewire enabled (AC)

The CyberData SIP-enabled VoIP V2 Loudspeaker Amplifier is for use with Singlewire's paging and emergency notification software InformaCast® or InformaCast CK. This PoE-powered device hooks up easily to new and existing Singlewire installations.

CyberData VoIP Loudspeaker Amplifier - Singlewire enabled (WiFi)

The new CyberData V2 SIP-enabled VoIP Loudspeaker Amplifier is for use with Singlewire's paging and emergency notification software InformaCast or InformaCast CK. It provides an easy method for implementing an IP-based overhead paging system for both new and legacy installations.The Amplifier is designed for noisy environments such as warehouses and shop floors. It comes with a weather-resistant NEMA enclosure. With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line-out connector for connection to an external amplifier.

Results 1-10 of 18