WiFi Systems

The Altai C1 WiFi CPE is designed to be used in Altai Super WiFi systems to extend outdoor coverage to indoor broadband connectivity.
The Altai C1 employs the concept of boosting up signal strength and thus the client's throughput in area covered by an A8/A8-E Super WiFi Base Station. It enables network operators to take advantage of the cost savings provided by the A8/A8-E Super WiFi Base Stations 10X greater coverage area when initially installing a WiFi system

Altai A8 WIFI Cellular Base Station

The Altai A8 WiFi Cellular Base Station is the world's first WiFi outdoor access point optimized for maximum coverage from a minimum number of installation sites. The Altai A8 has been designed to provide industry best coverage and capacity without complicated networking protocols or the need for a high density of transmitters. The Altai A8 WIFI Cellular Base Station specifies 2.4 GHz broadcast & 5.8 GHz backhaul, Coverage Area 500m Radius and includes 01 A8 Base Station, 04 2.4GHz 14DBi X-pol directional antennas and mounting kits. RF cables not included (8 x 2-meter needed, sold separately). POE injector not included (sold separately also).

Altai A2 WIFI Access Point/Bridge

A2 WIFI Access Point/Bridge 802.11b,g,n
2.4 GHz broadcast & 5 GHz backhaul. Includes built-in 5GHz antenna, PoE Adapter with cable, mounting kit and 2 external 2.4Ghz antenna ports. The 2.4Ghz external antennas are not included (sold separately)

The Altai A2 WiFi Access Point is designed to be used in Altai A8 WiFi cellular systems to increase system capacity, extend coverage and fill-in low signal areas that are blocked by terrain or buildings.

The A2 can also be used as a standalone access point for campus area coverage (smaller systems), where the A8 WiFi Cellular Base Station is not required

Operating as an Access point, the Altai A2 will need two 2.4GHz Omni antennas. As a point to point bridge operating at 5.8 GHz, the Omni antennas are not needed.

Altai A2 WIFI Base Station/Fill-in Access Point

The Altai A2 Base Station/Fill-in Access Point
2.4 GHz broadcast & 5 GHz backhaul, Coverage Area of 100m radius. Includes PoE adaptor with cable, mounting kit, 02 x 5dBi 2.4 GHz 360 degrees beamwidth omni antennas & built-in 5GHz panel antenna.

The Altai A2 WiFi Pico Access Point is designed to be used in Altai A8 WiFi cellular systems to increase system capacity, extend coverage and fill-in low signal areas that are blocked by terrain or buildings.

The A2 can also be used as a standalone access point for campus area coverage (smaller systems), where the coverage of the A8 WiFi Cellular Base Station is not required

Altai A0 WIFI Bridge with internal antenna

Altai A0 WIFI Bridge
5GHz Backhaul transmitter with internal antenna (17dBi flat panel). Also includes PoE adaptor with cable and mounting kit.
The Altai A0 WiFi Bridge is based on the 802.11a standard for providing point-to-point as well as point-to-multipoint communications. The A0 WiFi bridge with integrated antenna can be installed easily for wide area networking, and deployed as the wireless backbone with high throughput data transmission.

Altai A3 Smart WiFi (2-radio)

A3 Smart WiFi Access Point/ Repeater/ Bridge (2-radio)
The world’s 1st outdoor industrial grade 802.11n Smart WiFi product
Flexible mounting options for both outdoor and indoor
Support multiple-backhaul options: external HSPA/ WiMAX/ LTE backhaul, Gigabit Ethernet or 2.4G/ 5GHz WiFi
Multiple operating modes supported: Access Point, Repeater, or Bridge mode
Support 802.11 a/b/g/n wireless modes with dual-band built-in antennas
Integrated access controller with Authentication, Bandwidth Management and Radius support features.
Integrated bandwidth control.
Includes 02 built-in 802.11abgn radio with dual-band antennas, 01 POE adaptor, 01 USB port for HSPA/ WiMAX

Altai A3 Smart WiFi (3-radio)

A3 Smart WiFi Access Point/ Repeater/ Bridge (3-radio)
The world’s 1st outdoor industrial grade 802.11n Smart WiFi product
Flexible mounting options for both outdoor and indoor
Support multiple-backhaul options: external HSPA/ WiMAX/ LTE backhaul, Gigabit Ethernet or 2.4G/ 5GHz WiFi
Multiple operating modes supported: Access Point, Repeater, or Bridge mode
Support 802.11 a/b/g/n wireless modes with dual-band built-in antennas
Integrated access controller with Authentication, Bandwidth Management and Radius support features.
Integrated bandwidth control.
Includes 03 built-in 802.11abgn radio with dual-band antennas, 01 POE adaptor, 01 USB port for HSPA/ WiMAX, 1 external 2.4/ 5GHz SMA antenna port.
The external antenna is not included (sold separately).

Altai Panel Antenna 5GHz 18dBi

5GHz, 18dBi, 18 degrees Beamwidth Panel Antenna (for A8 backhaul).
Requires 2m cable

Altai Omni Antenna 5GHz 8dBi

5GHz, 8dBi, 360 degrees beamwidth omni antenna (for A8 backhaul)
Requires 2m cable

Altai Omni Antenna 2.4GHz 5dBi

2.4GHz 5dBi, 360 degrees Beamwidth omni Antenna (for A2 access).

Results 1-10 of 25