Ethernet Extenders & Infrastructure

Request Account

HIGHWIRE Connect (pairs) - Ethernet over coax device

HIGHWIRE Connect (pair of units) Ethernet over video cable converter (100BaseT)

MSRP Price: $378.00

HIGHWIRE Connect (single units) - Ethernet over coax device

HIGHWIRE (single unit) Ethernet over video cable converter (100BaseT)

MSRP Price: $189.00

HIGHWIRE with Power over Ethernet OUT (single units)

HIGHWIRE Ethernet over coax device with PoE OUT (single units) - The latest addition to the HIGHWIRE range, this new model includes Power over Ethernet (PoE) for powering an IP cameras via the CAT5 network cable. The HIGHWIRE is powered as normal (usually from the legacy analog camera PSU), and then the PoE output runs the IP camera, making installation easy. 100% compatible with all HIGHWIRE versions.

This Highwire with PoE out can automatically enable up to 6.5 Watts of power (IEEE Class 1 or 2) to compatible network cameras, via its Ethernet port.

MSRP Price: $267.00

CAMSWITCH Quad 5-port network switch

CAMSWITCH Quad 5-port network switch with 4 x PoE OUT - CAMSWITCH is a four-plus-one-port 100BaseT Ethernet industrial network switch especially designed for networked video applications. Four of the ports offer Power over Ethernet (PoE) for powering IP cameras via the CAT5 network cable. The fifth port on the opposite side of the case provides a convenient downstream network link for easy cable management. CAMSWITCH Quad itself is powered by a 12V or 24V supply at the camera end. Wall-mountable, robust, compact and priced to compete with standard desktop switches which are less well-suited to real-world installations.
Highwire Quad has an available budget of 30 Watts, which it can allocate to POE devices according to their Power Class.
Note: PoE out capability is limited to 2 ports when using Class0 devices.

MSRP Price: $216.00

OUTREACH Cat5 LAN & PoE extender

OUTREACH Cat5 LAN & PoE extender (passive 100m extension) - OUTREACH doubles, triples or even quadruples the normal 330ft (100m) CAT5 cable run length for 100BaseT networks. It forwards both Ethernet and PoE for another 330ft (100m) using a patent-pending power-processing scheme, and multiple units can be employed in series for even longer distances, with no degradation in network speed or latency. OUTREACH itself is powered by a PoE network switch (or PoE injector) and so requires no separate power connection in the middle of the cable, making it extremely easy to connect and power IP cameras two or three times further than previously possible without going to fibre or installing midspan power sources.
Outreach will only enable power to POE devices if it is guaranteed to meet the characteristics of the IEEE POE specification. Depending of the characteristics of the cable, POE power source used or the powered device may be requesting a higher than necessary power class, the link can be simply upgraded with an OUTSOURCE to increase maximum range.

MSRP Price: $199.00

HIGHWIRE Quad with four Power over Ethernet OUT ports

HIGHWIRE Quad 4-port with 4 x PoE OUT - This model integrates HIGHWIRE with a four-port 100BaseT network switch, including Power over Ethernet (PoE) for powering four PoE Class 2 (6.5W) IP cameras via the CAT5 network cable. HIGHWIRE Quad itself is powered by a 12V or 24V supply near the camera end, and supports all four IP cameras connections on one legacy coaxial video cable, communicating with a standard single-port HIGHWIRE at the control room end. HIGHWIRE Quad can even support 4 x mega-pixel IP cameras on one coax. Wall-mountable, robust, compact and extremely cost-effective.
Highwire Quad has an available budget of 30 Watts, which it can allocate to POE devices according to their Power Class.
Note: PoE out capability is limited to 2 ports when using Class0 devices.

MSRP Price: $475.00

Results 1-6 of 13