Accessories
Amplifiers
Intercoms
Paging aggregations
Speakers and Horns
 
010988_t.jpg
CyberData 3-port Ethernet Switch

The Cyberdata 3-Port Ethernet Switch enables users of a PC to split a single Ethernet port into two Ethernet ports, eliminating the need for additional cable runs. The power for the switch is provided by a USB connection on the host PC. No external power supply is required. The three ports auto-negotiate and work in full 10/100 duplex modes.

 
VoIP_speaker_t.jpg
Cyberdata Analog Speaker - Gray White
This V2 Analog Speaker is an option for the CyberData V2 Standard speaker that supports an amplified audio output for a second analog speaker.
When connecting this Analog speaker to the CyberData V2 IP speaker, the total Speaker wattage is the same. However, by connecting this analog speaker, additional coverage can be realized.
This Analog speaker can be mounted with the same mounting hardware option available for the IP versions of CyberData speakers.
 
VoIP_speaker_t.jpg
Cyberdata Analog Speaker - Signal White
This V2 Analog Speaker is an option for the CyberData V2 Standard speaker that supports an amplified audio output for a second analog speaker.
When connecting this Analog speaker to the CyberData V2 IP speaker, the total Speaker wattage is the same. However, by connecting this analog speaker, additional coverage can be realized.
This Analog speaker can be mounted with the same mounting hardware option available for the IP versions of CyberData speakers.
 
011106_t.jpg
CyberData Clock Kit Flush Mount adapter - Gray White
The CyberData Clock Kit Flush Mount adapter is an upgrade to the CyberData V2 and V2 Talk-Back speaker that provides a highly visible clock display. This display can be in 12 or 24 hour format whose time base is either taken from a remote NTP server or it's on-board real-time-clock circuity.
The VoIP Ceiling Speaker, V2 Speaker or Talk-Back Speaker must be purchased separately.
 
011106_t.jpg
CyberData Clock Kit Flush Mount adapter - Signal White
The CyberData Clock Kit Flush Mount adapter is an upgrade to the CyberData V2 and V2 Talk-Back speaker that provides a highly visible clock display. This display can be in 12 or 24 hour format whose time base is either taken from a remote NTP server or it's on-board real-time-clock circuity.
The VoIP Ceiling Speaker, V2 Speaker or Talk-Back Speaker must be purchased separately.
 
011068_t.jpg
Cyberdata Horn Loudspeaker
The 011068 Loudspeakers feature a highly efficient compression driver, weather resistant construction, and UV resistant materials.
40 Watts of continuous duty, 8 ohms nominal.
 
011124_t.jpg
CyberData PoE Power Injector 25W
CyberData PoE Power Injector 802.3at – Can be used with v2 Loudspeaker & Paging Amps for extra power
 
VoIP_speaker_t.jpg
Cyberdata VOIP Ceiling Speaker V2 - Gray White
The CyberData SiP-enabled Version 2 Ceiling Speaker now supports two SIP extensions. The second extension is a dedicated night ringer. The Version 2 speaker also has network controlled speaker volume, Simultaneous SIP and priority based Multicast streaming, and is compatible with the new CyberData Clock kit.
 
VoIP_speaker_t.jpg
Cyberdata VOIP Ceiling Speaker V2 - Signal White
The CyberData SiP-enabled Version 2 Ceiling Speaker now supports two SIP extensions. The second extension is a dedicated night ringer. The Version 2 speaker also has network controlled speaker volume, Simultaneous SIP and priority based Multicast streaming, and is compatible with the new CyberData Clock kit.
 
011035_t.jpg
Cyberdata VOIP Emergency Intercom
The CyberData SIP-enabled VoIP Indoor Emergency Intercom is a two-way communications device that is used in an area where either an emergency panic button or two-way priority communications are required. The intercom is compatible with most SIP-based IP PBX servers that comply with SIP RFC 3261.
 
Results 1-10 of 371234